Thursday, May 10, 2012

Pro-one rack front panel sketch

Not much to say - just made an initial sketch of the pro one "rack" front panel. The panel is 5U high and 430mm wide, which leaves room for rack ears to be added later - meaning that the machine can be used both as a desktop version and as a rackmounted one.


3 comments:

  1. This looks great, Joakim! Did this project ever get fully realized?

    D.

    ReplyDelete
  2. Thank you :-)The project is still very much in progress - I have designed the PCBs for the oscillators and filter pluss one more that I can't remember right now. I have also bought the necessary CEM chips. However, I've spent most of the time lately working on the MPG-200, a midi-to-PG200 converter for the JX-3P.

    ReplyDelete
  3. Looking forward to see where all this is going and how it all works out! Good luck with it!

    D.

    ReplyDelete